• March 05, 2020

 USTER® SENTINEL’s bobbin build-up report is the key to optimized yarn production. The system’s unmatched detection of end-breaks provides the basic platform, which is extended to total control of end-breaks when combined with USTER® ROVING STOP. The instant stop of roving feed at an end-break will reduce waste significantly and make raw material usage more cost-effective. Calculations show that 70% less pneumafil waste equates to a saving of nearly 1% in raw material, based on current spinning conditions. This obviously makes for a shorter investment payback.

Designed for top productivity

Using USTER® SENTINEL with USTER® ROVING STOP improves productivity and cuts down the risk of quality problems in ring spinning. Potential quality claims are avoided, since waste material and uncontrolled fiber – which could affect neighboring spindles and the entire machine – are greatly reduced by the USTER® ROVING STOP.

Overload on rollers is also prevented, ensuring higher productivity through reduced lapping. These benefits together can be expected to extend the service life of spinning components such as aprons, cots and cylinders by around 20%. 

The design of USTER® ROVING STOP is striking. Its streamlined and uncluttered profile is geared to optimum machine performance. The unique compact shape leaves operators clear access, saving time and speeding up responses. And its smart design enables the USTER® ROVING STOP to implement a rapid and complete separation of the process, to avoid raw material waste.

 USTER® ROVING STOP – complete control over end-breaks

   Higher yield and fewer quality claims

The advantages of USTER® SENTINEL go far beyond end-break detection: it brings a completely new approach to quality, productivity and efficiency in ring spinning. Bobbin build-up information and end-break detection are the basic functions, but total optimization is the result. The intuitive reports on bobbin build-up include every parameter influencing end-breaks. Clear visuals point to exact reasons for breaks, making optimization easy. Mills benefit from improvements in ambient conditions, service life of mechanical components – and machine speed. 

Machine performance is displayed in real-time, giving a fast overview of the most relevant production and laboratory data – as well as the machine’s energy consumption. The well-established expert system supports mills with clear guidance to profitable optimization.

Higher yield and fewer quality issues also result from reduced repair times. Badly-performing spindles are reliably identified and the USTER® SENTINEL guides machine operators quickly to spindle breaks, through clear and simple indications. Other issues which often impair the spinning process – such as idle, rogue and off-quality spindles, as well as spindle slip – are all monitored for fast response.

Profitability: the ultimate goal

USTER’s ring spinning optimization system maximizes profitability where it matters most. USTER® SENTINEL measures and controls the most expensive process in yarn manufacturing. It monitors the productivity of all spindles, as well as providing the required links and information to help the spinning mill optimize both machine performance and the entire process. 

Connecting USTER® SENTINEL to the Total Testing Center of the USTER® TESTER 6 opens the way to extended analysis, based on centralized quality data from all spinning processes. This is the route to management of a spinning mill with quality in mind. Adding USTER® SENTINEL data to this creates the ultimate quality optimization package. This is a significant further development milestone, supporting spinners to achieve the ultimate goal of excellence in quality and profitability.

Loepfe

https://www.loepfe.com/en

Weavers take no risk.  Ready for more safety?

WeftMaster CUT-iT for airbag fabrics. In case of the unexpected while driving a car, people are relying on airbags for their life protection. Hence, airbag fabrics must have flawless quality. Renowned weavers of airbag fabrics take no risk; they rely on Loepfe's CUT-iT to ensure their top quality fabrics have a perfectly defined and uniform selvedge.

Making use of the unrivalled features of CUT-iT during the fabric production process ensures a quick return on investment for safety-critical products such as airbags. The applications where CUT-iT improves a product’s quality are not limited to this showcase. All over the world, producers of high-end technical fabrics specify CUT-iT of Loepfe to guarantee a fabric selvedge without compromise. A top quality and uniform selvedge is highly valued when the yield in post processing is dependent on it.

Coated fabrics such as tarpaulins or sailcloth can only be perfect if the base material used has top aspect selvedge guaranteed by CUT-iT.

CUT-iT offers precise controllable settings for Loepfe´s hot wire cutters. The unit memorizes settings for later use. The client-server mode is very useful on tape weaving machines. CUT-iT has no analog controls like other controllers and hence has a better resistance to tampering. This recently developed product of Loepfe is highly demanded in cleantech, medtech, geotextiles, automotive and many more high-tech areas.